
Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection: | Screwed / Flange | ||||||||||
Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
Diaphragm & Media Temp: |
| ||||||||||
Circumstance Temp: | -10 C to 70 C | ||||||||||
Media: | Air, Water, Chemical, Gas, Oil, Steam, LPG. | ||||||||||
Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
Operating Voltage & Power Consumption: |
| ||||||||||
Optional Feature: | 90% Power saver series also available, Water hammering reducer also available to avoid water hammer forces. Special high flow rate series available on request at low pressure or gravity pressure application. | ||||||||||
Other Specification Data: | Available on Request. |
Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position, or freely movable in between as require. |
---|---|
Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. |
Note: | Use of filter in the inlet port is recommended. Preferably Over Horizontal Pipeline with the coil upright. |
Caution: | AC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2 |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm | Max. Operating Pressure Kg/cm | Seal & Diaphragm Material | Flow Factor Kv m / hr | |
---|---|---|---|---|---|---|---|---|
AC | DC | |||||||
MBN73 | Brass | 3/8 Inch | 15.50 | 0 | 7 | 7 | NBR / EPDM / VITON | 2.50 |
MBN23 | Brass | 1/2 Inch | 15.50 | 0 | 7 | 7 | NBR / EPDM / VITON | 3.10 |
MBN24 | Brass | 1/2 Inch | 12 | 0 | 10 | 10 | NBR / EPDM / VITON | 2.10 |
MCN24 | CF8 / CF8M | 1/2 Inch | 17 | 0 | 10 | 8 | NBR / EPDM / VITON / PTFE | 3.20 |
MCN34 | CF8 / CF8M | 3/4 Inch | 20 | 0 | 10 | 8 | NBR / EPDM / VITON | 5 |
MCN44 | CF8 / CF8M | 1 Inch | 25.50 | 0 | 10 | 8 | NBR / EPDM / VITON / PTFE | 8.20 |
MCN6D3 | CF8 / CF8M | 1-1/2 Inch | 35 | 0 | 4 | 4 | NBR / EPDM / VITON | 18.20 |
MCN8D3 | CF8 / CF8M | 2 Inch | 46.50 | 0 | 4 | 4 | NBR / EPDM / VITON | 31.40 |