
Port: | Refer below technical data sheet (Available BSP / NPT) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
End Connection: | Screwed / Flange | ||||||||||
Body Material: | SS ASTM A351 Grade CF8 / CF8M, Forged Brass | ||||||||||
Diaphragm & Media Temp: |
|
||||||||||
Circumstance Temp: | -10 C to 70 C | ||||||||||
Media: | Steam, Hot Water, Hot Fluid, Water Oil | ||||||||||
Main Features: | Internal Parts are in superior corrosion resistance steel, (Equivalent to SS316L) Suitable for Food Industries, Pharmaceuticals, Chemical application & Highly corrosive environment. | ||||||||||
Operating Voltage & Power Consumption: |
|
||||||||||
Optional Feature: | 90% Power saver series also available, Manual Override, Water hammering reducer also available to avoid water hammer forces. | ||||||||||
Other Specification Data: | Available on Request |
Coil Features: | High Reliability Unaffected by Voltage Surges. Easy coil changes coil lockable in 4X90 position or freely movable in between as require. |
---|---|
Coil Housing: | Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure |
Note: | Use of filter in the inlet port is recommended. |
Model No. | Body Material | Pipe (Inch) | Orifice (mm) | Min. Operating Pressure Kg/cm | Max. Operating Pressure Kg/cm | Seal & Diaphragm Material | Flow Factor Kv m / hr |
---|---|---|---|---|---|---|---|
PBN260 | Brass | 1/2 Inch |
12 | 0.30 | 10 | NBR / EPDM / VITON | 2.10 |
PBN360 | Brass | 3/4 Inch |
20 | 0.30 | 10 | NBR / EPDM / VITON | 5.50 |
PBN460 | Brass | 1 Inch |
25 | 0.30 | 10 | NBR / EPDM / VITON | 9 |
PBN660 | Brass | 1-1/2 Inch |
36 | 0.30 | 10 | NBR / EPDM / VITON | 17.10 |
PCNB8 | CF8 / CF8M | 4 Inch |
98 | 0.50 | 12 | NBR / EPDM / VITON | 115 |